Magnetite nanoparticles−based hydroxyl radical scavenging activity assay of antioxidants using N,N-dimethyl-p-phenylenediamine probe

Excessive amounts of reactive oxygen species (ROS), unless counterbalanced by antioxidants, can cause cellular damage under oxidative stress conditions; therefore, antioxidative defenses against ROS must be measured. With the development of nanotechnology, nanoparticles have found numerous applications in science, health, and industries. Magnetite nanoparticles (Fe ₃ O ₄ :MNPs) have attracted attention because of their peroxidase-like activity. In this study, hydroxyl radicals (•OH) generated by MNPs-catalyzed degradation of H ₂ O ₂ converted the N,N-dimethyl-p-phenylenediamine (DMPD) probe into its colored DMPD•+ radical cation, which gave an absorbance maximum at λ = 553 nm. In the presence of antioxidants, •OH was partly scavenged by antioxidants and produced less DMPD• ⁺ , causing a decrease in the 553 nm-absorbance. Antioxidant concentrations were calculated with the aid of absorbance differences between the reference and sample solutions. The linear working ranges and trolox equivalent antioxidant capacity coefficients of different classes of antioxidants were determined by applying the developed method. In addition, binary and ternary mixtures of antioxidants were tested to observe the additivity of absorbances of mixture constituents. The method was applied to real samples such as orange juice and green tea. Student t-test, F tests, and the Spearman’s rank correlation coefficient were used for statistical comparisons.     

Momentum and heat transfer of a special case of the unsteady stagnation-point flow

This paper investigates the unsteady stagnation-point flow and heat transfer over a moving plate with mass transfer,which is also an exact solution to the unsteady Navier-Stokes(NS)equations.The boundary layer energy equation is solved with the closed form solutions for prescribed wall temperature and prescribed wall heat flux conditions.The wall temperature and heat flux have power dependence on both time and spatial distance.The solution domain,the velocity distribution,the flow field,and the temperature distribution in the fluids are studied for different controlling parameters.These parameters include the Prandtl number,the mass transfer parameter at the wall,the wall moving parameter,the time power index,and the spatial power index.It is found that two solution branches exist for certain combinations of the controlling parameters for the flow and heat transfer problems.The heat transfer solutions are given by the confluent hypergeometric function of the first kind,which can be simplified into the incomplete gamma functions for special conditions.The wall heat flux and temperature profiles show very complicated variation behaviors.The wall heat flux can have multiple poles under certain given controlling parameters,and the temperature can have significant oscillations with overshoot and negative values in the boundary layers.The relationship between the number of poles in the wall heat flux and the number of zero-crossing points is identified.The difference in the results of the prescribed wall temperature case and the prescribed wall heat flux case is analyzed.Results given in this paper provide a rare closed form analytical solution to the entire unsteady NS equations,which can be used as a benchmark problem for numerical code validation.     

A Comparison of Two Isoreticular Metal–Organic Frameworks with Cationic and Neutral Skeletons: Stability,Mechanism, and Catalytic Activity

Although many ionic metal–organic frameworks (MOFs) have been reported, little is known about how the charge of the skeleton affects the properties of the MOF materials. Herein we report how the chemical stability of MOFs can be substantially improved through embedding electrostatic interactions in structure. A MOF with a cationic skeleton is impervious to extremely acidic, oxidative, reductive, and high ionic strength conditions, such as 12 m HCl (301 days), aqua regia (86 days), H₂O₂ (30 days), and seawater (30 days), which is unprecedented for MOFs. DFT calculations suggested that steric hinderance and the repulsive interaction of the cationic framework toward positively charged species in microenvironments protects the vulnerable bonds in the structure. Diverse functionalities can be bestowed by substituting the counterions of the charged framework with identically charged functional species, which broadens the horizon in the design of MOFs adaptable to a demanding environment with specific functionalities.     

Mechanistic Insights into C(sp2)−C(sp)N Reductive Elimination from Gold(III) Cyanide Complexes

A new family of phosphine-ligated dicyanoarylgold(III) complexes has been prepared and their reactivity towards reductive elimination has been studied in detail. Both, a highly positive entropy of activation and a primary ^12/13C KIE suggest a late concerted transition state while Hammett analysis and DFT calculations indicate that the process is asynchronous. As a result, a distinct mechanism involving an asynchronous concerted reductive elimination for the overall C(sp²)−C(sp)N bond forming reaction is characterized herein, for the first time, complementing previous studies reported for C(sp³)−C(sp³), C(sp²)−C(sp²), and C(sp³)−C(sp²) bond formation processes taking place on gold(III) species.     

Synthesis and characterization of VO–vanillin complex immobilized on MCM-41 and its facile catalytic application in the sulfoxidation reaction,and synthesis of 2,3-dihydroquinazolin-4(1H)-ones and disulfides in green media

In this work, a vanillin complex is immobilized onto MCM-41 and characterized by FT-IR, X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, thermogravimetric analysis, and BET techniques. This supported Schiff base complex was found to be an efficient and recoverable catalyst for the chemoselective oxidation of sulfides into sulfoxides and thiols into their corresponding disulfides (using hydrogen peroxide as a green oxidant) and also a suitable catalyst for the preparation of 2,3-dihydroquinazolin-4(1H)-one derivatives in water at 90°C. Using this protocol, we show that a variety of disulfides, sulfoxides, and 2,3-dihydroquinazolin-4(1H)-one derivatives can be synthesized in green conditions. The catalyst can be recovered and recycled for further reactions without appreciable loss of catalytic performance.     

Self-reciprocal and self-conjugate-reciprocal irreducible factors of xn − λ and their applications

In this paper, we present some necessary and sufficient conditions under which an irreducible polynomial is self-reciprocal (SR) or self-conjugate-reciprocal (SCR). By these characterizations, we obtain some enumeration formulas of SR and SCR irreducible factors of $x^n-\lambda$, $\lambda \in {\mathbb{F}}_q^{⁎}$, over ${\mathbb{F}}_q$, which are just open questions posed by Boripan et al. (2019). We also count the numbers of Euclidean and Hermitian LCD constacyclic codes and show some well-known results on Euclidean and Hermitian self-dual constacyclic codes in a simple and direct way.     

Sextic centrifugal distortion constants: interplay of density functional and basis set for accurate yet feasible computations

Quantum-chemical calculations assist the analysis of laboratory spectra, and often provide the only means to determine spectroscopic data that cannot be accessed experimentally. Accurate predictions of vibrational and rotational spectroscopic parameters are required for applications in the field of high-resolution molecular spectroscopy. While the accuracy issue of the quantum-chemical calculation of vibrational properties and of equilibrium structures has been addressed in the literature, the same is not true for centrifugal distortion constants that however play an essential role for the interpretation of remote sensing data. In this work, the performance of several model chemistries, rooted mainly in density functional theory, in computing sextic centrifugal distortion constants is assessed employing a benchmark set of molecules of both atmospheric and astrochemical relevance. The Jensen’s (aug-)pcs-n basis sets, different flavours of Dunning’s triple-ζ basis sets and the SNSD basis set, are employed in conjunction with different functionals, and their predictions are benchmarked against experimental and theoretical data at the coupled cluster level of theory. This study also demonstrates the reliability of the calculation of sextic centrifugal distortion constants within the Gaussian16 rev. B.01 program package. Reliable predictions of the sextic centrifugal distortion constants for the gauche- and trans-conformers of ethyl-mercaptan are also presented.     

Dynamic and buckling analysis of polymer hybrid composite beam with variable thickness

This work deals with a study of the dynamic and buckling analysis of polymer hybrid composite(PHC) beam. The beam has variable thickness and is reinforced by carbon nanotubes(CNTs) and nanoclay(NC) simultaneously. The governing equations are derived based on the first shear deformation theory(FSDT). A three-phase HalpinTsai approach is used to predict the mechanical properties of the PHC. We focus our attention on the effect of the simultaneous addition of NC and CNT on the vibration and buckling analysis of the PHC beam with variable thickness. Also a comparison study is done on the sensation of three impressive parameters including CNT, NC weight fractions, and the shape factor of fillers on the mechanical properties of PHC beams,as well as fundamental frequencies of free vibrations and critical buckling load. The results show that the increase of shape factor value, NC, and CNT weight fractions leads to considerable reinforcement in mechanical properties as well as increase of the dimensionless fundamental frequency and buckling load. The variation of CNT weight fraction on elastic modulus is more sensitive rather than shear modulus but the effect of NC weight fraction on elastic and shear moduli is fairly the same. The shape factor values more than the medium level do not affect the mechanical properties.     

Enthalpy Relaxation Study of Poly(Vinyl Chloride) Films Based on the Time-Temperature Superposition Principle

Abstract

In the enthalpy relaxation of poly(vinyl chloride), a decrease in enthalpy upon the isothermal ageing was measured using the differential scanning calorimetry method as a function of ageing time (t_A) and ageing temperature. The range of the ageing temperature was from 56?°C (T_g ? 25?°C) to 72?°C (T_g ? 9?°C) where T_g denotes the glass transition temperature. The limiting value of the decrease in enthalpy was determined by applying a stretched exponential function to the measured enthalpy data. The relaxation function (?) was derived from the measured enthalpy and the construction of a master curve was tried by shifting the ? ? t_A curves of the respective ageing temperatures horizontally. Although there was no agreement between the shift factors (a_T) and the relaxation times of the ? ? t_A curves, the superposition was successfully constructed and the a_T values obtained for the poly(vinyl chloride) sample were found to be comparable to those reported for viscoelastic experiments over a broad temperature range above and below T_g carried out for different polymers. The origin of the decrease in enthalpy was briefly discussed in terms of the chain dynamics in the isothermal condition.